China atlas copco parts in china Manufacturer, Supplier, Factory

Installation Specifications: When replacing the cooler kit, strictly follow the steps in the equipment manual to ensure that the sealing components are installed properly, and avoid leakage or insufficient heat dissipation due to improper assembly. Cleaning Preparations: Before installing the new cooler, it is recommended to clean the pipes and interfaces of the cooling system to remove internal residues such as impurities, scale, or oil sludge. Performance Testing: After replacement, start the compressor and monitor parameters such as operating temperature and pressure to confirm that the cooling system is working properly . Source of Spare Parts: It is recommended to purchase this service kit from Atlas Copco's official after-sales service or authorized dealers to ensure the original factory quality and compatibility of the spare parts. Non-original factory spare parts may have size deviations or material non-compliance issues, affecting cooling efficiency and equipment lifespan.

Purchase Recommendation The 55℃ temperature control valve is a specific parameter component. It is recommended to purchase it through our authorized dealers, providing the specific model of the air compressor (such as G55, GA55, etc.) and the original valve part number to ensure the acquisition of matching original factory parts. Non-original factory valves may have temperature setting deviations or compatibility issues, affecting the temperature control accuracy and equipment safety. Although this valve is not common, it is crucial for ensuring the stable operation of the air compressor under specific conditions. Attention should be paid to maintenance and the accuracy of the parts.

ATLAS COPCO Air Compressor "Purification Tube Assembly" Replacement and Maintenance Recommendations Replacement Cycle: At least once a year; Replace when pressure drop exceeds preset value or indicator indicates; In some operating conditions, this can be shortened to 4,000 hours or less. Operation Points: Replace the entire unit or isolate and depressurize the part before replacement; Check the double O-rings and other seals during replacement; Do not clean the filter element; Only replace the original factory parts. Energy Savings Benefits: High-quality filter elements can reduce pressure drop and lower energy consumption; Ignoring the replacement will lead to a significant increase in energy consumption.

2906096400 KIT DRAIN can effectively, reliably and efficiently collect and remove liquid water from the air system. It is a zero-loss drainage device that drains only when the preset water level is reached, ensuring that no energy is released when the receiver is empty. Its special housing design makes it applicable in both oil-lubricated and oil-free units.

1613610591 Atlas Copco uses high-quality filter materials, with a filtration accuracy reaching the micron level. It can effectively retain tiny impurities. 1613610591 Atlas Copco is equipped with a bypass valve. When the filter element gets clogged and the pressure difference exceeds the set value, the bypass valve will automatically open to ensure the continuous circulation of lubricating oil and prevent the equipment from suddenly breaking down due to lack of oil.

Common Problems and Maintenance Suggestions Oil deterioration: manifested as darker color (turning brown or black), the appearance of sludge, emulsification (becoming milky white). This is mostly caused by high-temperature oxidation, water contamination or pollution. It is necessary to replace the oil immediately and investigate the causes (such as cooling system failure, breathing device blockage). Abnormal increase in fuel consumption: may be due to the failure of the oil separator, clogging of the return oil pipe or damage to the sealing parts. It is necessary to check the relevant components and replace them. Selection Principles: Only Atlas Copco original oil or certified equivalent oil products must be used. Inferior oil will lead to severe carbon deposits, accelerated bearing wear, and even cause major failures such as engine stalling.