China air compressor atlas copco Manufacturer, Supplier, Factory

By using the original Atlas Copco filter kits or service kits, the failure rate of the equipment can be effectively reduced, its service life can be prolonged, and the quality of compressed air can be maintained. This is particularly suitable for industrial scenarios where high reliability of equipment is required.

Maintenance Points: The coupling of Atlas Copco air compressors usually requires regular checks on the wear condition of its elastic elements, the tightness of the connecting bolts, etc. Some models of air compressors also have coupling cooling fans to help lower the operating temperature of the coupling and extend its service life. During maintenance, the working condition of the cooling fans also needs to be checked.

The 8000-hour maintenance kit for the Atlas Copco IMD260 air compressor may vary slightly in specific component quantity and model depending on the supplier or original factory providing the maintenance kit. For accurate kit contents and detailed information, it is recommended to contact us directly, providing the specific model and serial number of the air compressor to obtain the most precise maintenance kit-related materials.

Suggestions for replacement or purchase of Atlas Copco air compressor pressure switch PS3-W6S: Due to the direct correlation between pressure switch and equipment pressure control accuracy and operational safety, it is recommended to use original accessories (serial number 1624962200) to ensure compatibility. During installation, it is necessary to set the correct upper and lower pressure limits according to the equipment manual to avoid equipment failure caused by parameter errors. If you need to confirm whether it is compatible with a specific model, please provide the complete model and serial number of the compressor and contact us.

Atlas Copco air compressor sensor kit replacement and usage precautions: Sensor replacement should be carried out by professional technicians. Wiring and calibration must be done in accordance with the equipment manual specifications to ensure correct signal transmission. Before installation, the sensor installation position should be cleaned to avoid the influence of oil stains, dust, etc. on measurement accuracy. It is recommended to calibrate the sensors regularly (according to the equipment maintenance cycle) to ensure their measurement accuracy and extend their service life.

Faults and Maintenance Suggestions Common Problems and Solutions: Poor or blocked drainage: This is often caused by accumulated impurities. You can disassemble the valve body to clean the filter screen. In severe cases, the original valve needs to be replaced. Valve always closed or always open: This may be due to a fault in the electromagnetic valve coil or damage to the controller. You need to check the circuit and replace the corresponding components. Leakage: Caused by aging seals. It is recommended to directly replace the entire drainage valve (the original kit includes all seals). During maintenance, it is necessary to regularly (every 3 months) check if the wiring is loose, clean the drainage outlet, ensure that the winter environmental temperature is not lower than 0℃, and prevent freezing and cracking.