China 2906066900 Atlas Copco Manufacturer, Supplier, Factory

Maintenance and Replacement Suggestions for Atlas Copco Oil Coolers Regular Cleaning: For air-cooled coolers, clean the dust and oil stains on the fins regularly. For water-cooled ones, check if the water channels are blocked or clogged to ensure the cooling effect. Leak Check: During daily inspections, observe if there are oil stains on the surface and interface of the cooler. If leakage is detected, replace the sealing parts or the entire kit promptly. Replacement Timing: When the cooler shows severe corrosion, large-scale damage to the fins, or internal blockage causing abnormal oil temperature rise , it is recommended to replace the entire kit. Preferentially use Atlas Copco original accessories to ensure compatibility with the unit and cooling performance. The reliable operation of this kit directly affects the energy consumption, stability, and service life of the oil-free air compressor, and is an important guarantee for maintaining the efficient operation of the unit.

Replacement and Maintenance Precautions If the components show signs of aging and cracking of the hose, leakage at the joints, damage to the reinforcement layer, or bulging, they must be replaced immediately to prevent leakage of high-pressure media, which could cause safety hazards or affect system operation; When replacing, it is essential to use the original Fx1050Xf type components to ensure that their dimensions, pressure resistance level, and joint sealing are consistent with the original components. Non-original components may cause installation difficulties or premature damage due to poor compatibility; During installation, pay attention to the bending radius of the hose (it must not be less than the specified value, usually 6-8 times the diameter of the hose), avoid excessive twisting or stretching, and keep away from high-temperature components and rotating parts. If necessary, use pipe clamps for fixation to reduce vibration and wear.

Key Parameters and Replacement Filter Accuracy: Approximately 10 - 15 μm, ensuring the lubricating oil entering the main unit is clean. Replacement Cycle: Usually every 4,000 - 8,000 hours or according to the equipment maintenance manual; apply a small amount of lubricating oil to the sealing ring before installation to avoid dry start-up. Installation Tips: After applying oil to the new filter sealing ring, install it according to the specified torque. After replacement, check the oil level and pressure drop.

The GVs R series is a robust and highly regarded range of vacuum pumps with a technologicallyadvanced design that is 'Made in India, The GVs R series are single stage, oil-sealed vacuumpumps that operate according to the proven oil-sealed rotary vane principle that has beensuccessfully used for many years in all general vacuum applications of the industry.

Quick selection steps: Determine whether to use the "gas side" or the "oil side". Provide key parameters: model / serial number, flow / pipe diameter, pressure rating, temperature, target cleanliness / emission limit. If there is an old part number / nameplate, directly provide for precise matching.

Maintenance Tips for Atlas Copco's Minimum Pressure Valve Regularly check if the valve is leaking (by listening or measuring pressure). If there is a leak, it may be due to worn seals or impurities blocking the mechanism. In such cases, clean or replace the components promptly. When replacing, ensure that the model matches the original factory model to guarantee that the pressure setting value, interface size, and the compressor system are consistent. Avoid poor lubrication or reduced system efficiency due to parameter mismatch. Before restarting after a long shutdown, manually check the flexibility of the valve core to prevent sticking due to oil residue solidification. The Atlas Copco minimum pressure valve, as the "pressure stabilizer" and "check valve" of the compressor oil circuit and gas circuit, is crucial for the safe operation and lifespan of the equipment. It is recommended to use original factory parts to ensure system compatibility and reliability.