China 2906039400 Atlas Copco Manufacturer, Supplier, Factory

Faults and Replacement Suggestions: Common Faults and Handling: Contact Erosion: Manifested as poor contactor engagement, severe overheating, or failure of the main circuit. Replace the contactor to prevent the motor from operating without phases; Winding Burnout: Usually caused by abnormal voltage or winding aging, resulting in the contactor unable to engage. Check the winding voltage and replace the original part; Stuck and Strange Noise: Caused by dirty iron core or failed spring. May lead to contact adhesion. Replace immediately to prevent the equipment from losing control. When replacing, please note: Power off and confirm that the main circuit voltage has been disconnected. When connecting, distinguish between the main contact (high-power circuit) and the auxiliary contact (control circuit). Secure the connection terminals to prevent loosening and overheating.

Maintenance precautions for the intake valve of Atlas Copco mobile air compressors Regularly check if the valve core is stuck: In mobile operation environments with a lot of dust, it is necessary to clean the inner cavity of the valve regularly to prevent impurities from causing the valve core to malfunction. Seal inspection: If there are situations such as a rapid drop in no-load pressure or abnormal intake noise, it may be due to wear of the seal, and replacement of the original factory parts should be done promptly. Maintenance of linkage components: For pneumatic-driven intake valves, the filter in the control air path needs to be cleaned to ensure clean air supply; for electronic control types, the sensors and line connections should be checked to avoid contact failure caused by vibration.

The Atlas Copco WUX series air compressor regulating valves are crucial components used to control the pressure, flow rate or load of the compressed air system. Their main function is to automatically adjust the intake volume or operating status of the compressor based on the demand for gas or changes in system pressure, in order to achieve energy-saving operation and stable gas supply.

Maintenance and precautions for the control unit of Atlas Copco air compressors Regularly check the display screen and buttons of the control unit to ensure they are functioning properly and that the heat dissipation and ventilation are adequate, to prevent the impact of high temperatures on performance. If a fault code appears, it is recommended to refer to the equipment manual for interpretation or contact the authorized service center of Atlas Copco for handling to avoid the expansion of problems due to self-operation. Some control units support firmware upgrades, and updates can be obtained through official channels to enhance functional stability.

Atlas Copco Operating Instructions The 40°C setting value for Atlas Copco is an optimized parameter specific to certain models or working conditions. It cannot be adjusted at will. Otherwise, it may affect the temperature control accuracy, leading to reduced equipment operation efficiency or component damage. When replacing parts, choose Atlas Copco original accessories to ensure they match the temperature control logic and interface of the equipment. Avoid system failures caused by compatibility issues. For specific model compatibility or more detailed technical parameters, it is recommended to refer to the equipment manual or contact the Atlas Copco authorized service center for confirmation.

List of accessories and part numbers Air filter (Air Filter): (Suitable for GXe7/GXe11/GXe15/GXe18/GXe22). Oil filter (Oil Filter): (Suitable for GXe7/GXe11/GXe15/GXe18/GXe22).