China 2906012900 ZA/ZR5-6 OIL COOLER KIT Manufacturer, Supplier, Factory

Atlas Copco Air Filter Maintenance and Replacement: It is necessary to conduct regular inspections and replacements based on factors such as the operating time of the compressor and the dust concentration in the working environment to ensure the filtering performance. If the filter becomes clogged or aged, it may cause insufficient air intake, affecting the output efficiency of the compressor and even triggering equipment failures. It is recommended to use original Atlas Copco parts to ensure compatibility with the equipment and filtering effectiveness, and to guarantee the stable operation of the compressor.

Note the installation requirements: When replacing the coupling components, follow the equipment specifications to ensure that the coaxiality and other installation parameters meet the standards, and avoid secondary damage.

Common Problems and Maintenance of Atlas Copco Oil Separator Reduced separation effect Reason: Filter blockage, damage, poor return oil pipeline, or excessively high temperature of the oil-gas mixture . Solution: Replace the filter, clean the return oil pipe, and check the cooling system to ensure the exhaust temperature is normal . Excessive pressure difference Sign: The pressure difference between the separator inlet and outlet exceeds 0.15MPa, resulting in reduced exhaust volume and increased energy consumption. Solution: Replace the filter in time to avoid filter damage or overload of the housing due to excessive pressure difference. Return oil failure Reason: Return oil valve blockage, throttling hole blockage, or leakage of the return oil pipe. Harm: The compressor operates without oil, causing wear of the main unit and sudden temperature rise. Solution: Disassemble and clean the return oil components to ensure smooth return oil.

By using the original Atlas Copco filter kits or service kits, the failure rate of the equipment can be effectively reduced, its service life can be prolonged, and the quality of compressed air can be maintained. This is particularly suitable for industrial scenarios where high reliability of equipment is required.

Oil Filter Filtering Precision: Usually, it adopts ultra-fine glass fiber composite filter material from the US HV Company or pure imported wood pulp filter material from the Korean Ahlstrom Company. The filtering precision is 10μm - 15μm, which can filter out solid particles, impurities, carbon deposits and metal shavings in the lubricating oil. Performance Features: It has the characteristics of withstanding high and low temperatures, and being resistant to synthetic oil. It can withstand high operating pressure, has strong pollutant absorption capacity, and a long service life. The filter paper has uniform pleat intervals, providing a large filtration area. It has strong mechanical resistance to pressure fluctuations and can ensure that the oil continuously flows to the compressor main unit under cold starting conditions or when the filter is clogged, protecting the equipment from malfunction.

Maintenance and Replacement Precautions for the Bushings of Atlas Copco Air Compressors Original Factory Parts Preferred: It is recommended to use Atlas Copco's original bushings to ensure dimensional accuracy and material compatibility, avoiding secondary damage caused by sub-brand parts quality issues. Installation Precision: The replacement should be carried out by professional technicians. The interference fit between the bushing and the bearing housing, as well as the clearance between the bushing and the shaft neck, must be strictly controlled. Special tools may be used for press-fitting in necessary cases. Compliance Check: After installation, the rotor clearance should be detected using a feeler gauge or precise instruments to ensure it meets the technical standards. Lubrication Assurance: After replacement, the specific compressor oil should be added in accordance with the specifications. Before starting, ensure that the lubrication system is properly supplied with oil.