China 1622369407 Manufacturer, Supplier, Factory

Maintenance and replacement of Atlas Copco spare parts temperature sensors: After long-term use, measurement deviations may occur due to oil contamination or aging of the probe. Regular cleaning and calibration are necessary. If there are abnormal temperature readings or frequent alarms, it is necessary to check whether the sensor wiring is loose or if the probe is damaged. When replacing, original factory spare parts should be selected to ensure compatibility with the control system and measurement accuracy.

Atlas Copco Installation and Maintenance Guidelines During installation, it is necessary to clean the oil stains and impurities from the surface of the distance ring, ensuring a tight fit with the mating parts without any gaps or skew. Avoid striking the edge of the distance ring (especially thin-walled parts), as this may cause deformation and affect the dimensional accuracy. During maintenance and inspection, check if the distance ring is worn, deformed or cracked. If any abnormalities are found, it should be replaced promptly; otherwise, it may lead to a decrease in the assembly quality and operational stability of the air compressor, causing vibration, abnormal noise or leakage, etc. Although the distance ring is a small standard part, its accuracy directly affects the assembly quality and operational stability of the air compressor. When selecting and installing, it is necessary to strictly follow the requirements of the equipment manual.

Purchase Recommendation The 55℃ temperature control valve is a specific parameter component. It is recommended to purchase it through our authorized dealers, providing the specific model of the air compressor (such as G55, GA55, etc.) and the original valve part number to ensure the acquisition of matching original factory parts. Non-original factory valves may have temperature setting deviations or compatibility issues, affecting the temperature control accuracy and equipment safety. Although this valve is not common, it is crucial for ensuring the stable operation of the air compressor under specific conditions. Attention should be paid to maintenance and the accuracy of the parts.

Since the Atlas Copco XAV series includes various models with different displacement and configurations, and due to the different production years, there may be variations in accessories. Some models may also adopt derivative models such as 1202804093.

The working principle of oil injected air compressor is mainly based on the principle of volumetric compression, and multiple functions such as cooling, sealing and lubrication are achieved by injecting lubricating oil.

Key Points for Bolt Installation and Maintenance of Atlas Copco Pre-tightening Torque: Appropriate torque should be applied according to the bolt's strength grade and connection requirements . Excessive torque can cause the bolt to break, while insufficient torque may result in poor sealing or loosening. Surface Treatment: The bolt surface is usually galvanized, phosphated , or oxidized . Before installation, check the surface for rust or damage. Cooperation Precision: The cooperation between the bolt and the nut or the bolt hole must comply with standards . Avoid overly loose or overly tight threads. Regular Inspection: After the air compressor has been running for a period of time, check if the bolts are loose. If rust, deformation, or fracture is found, replace the bolts of the same specification and strength in a timely manner.