News

The HP ELEMENT EXCHANGE KIT of Atlas Copco air compressors have extremely high requirements in terms of material, insulation performance, and temperature resistance, and must comply with relevant high-pressure electrical standards. During use, the following points should be noted: Regularly conduct insulation tests and functional verifications to prevent performance degradation due to aging or moisture absorption. When replacing components, select original factory or certified compatible parts to ensure compatibility with the equipment's high-pressure system and avoid potential safety hazards caused by substandard components. The maintenance operations must be carried out by professionals with high-voltage electrical qualifications and strictly follow safety procedures.

Atlas Copco Z160-275 transmission shaft bearing kit usage and maintenance precautions: When replacing, it must be operated by professional technicians. Follow the steps in the equipment maintenance manual strictly to ensure that the bearings are installed properly and the clearance is adjusted reasonably. Before installation, clean the transmission shaft and bearing housing, and check whether the relevant mating surfaces are intact to avoid impurities or damage affecting the bearing lifespan. It is recommended to conduct regular inspections in combination with the overall maintenance cycle of the equipment. If abnormal bearing noise or abnormal temperature rise is detected, the kit should be replaced promptly.

The 4000-hour oil filter usage recommendation for Atlas Copco: It is necessary to replace the filter according to the equipment manual, taking into account the operating time and actual oil condition. Even if it has not reached 4000 hours, if you find that the filter is clogged or the pressure difference is too high, you should replace it promptly. When replacing, it is necessary to use original factory parts to ensure the filtering performance and equipment safety. Avoiding failures such as main unit wear caused by inferior filters.

The Atlas Copco UD + series of filters come in multiple specific models (such as UD9+, UD15+, etc.), each corresponding to different processing flow rates and applicable equipment. If you need to know the parameters, compatible models or purchasing information for a specific model, it is recommended to obtain detailed information through the official channels of Atlas Copco or authorized dealers.

The MPV+THV 71 C IB C40/C55 accessories of Atlas Copco are specialized components belonging to a more advanced category. For specific structural details, installation requirements, and replacement cycles, it is recommended to refer to the corresponding maintenance manual of the equipment or contact us.

For the maintenance of UD 9 + from Atlas Copco, it is recommended to replace the filter elements at the specified intervals as per the equipment manual. During the replacement process, it is necessary to first depressurize the system and have it operated by professionals to ensure safety and installation quality. Specific information such as filtration accuracy, applicable equipment models, and procurement channels.