China Screw air Compressor air Intake Tube Hose Manufacturer, Supplier, Factory

Atlas Copco Air Compressor Oil Filter Housing Selection and Replacement Precautions Compatibility: It must match the filter element model, the interface size of the unit, and the working pressure to avoid filter failure due to excessive installation gap. Certification Requirements: Preferentially choose the housing from the original manufacturer or those that have passed pressure certification (such as ASME, CE) to ensure pressure safety. Installation Specifications: During assembly, the sealing surfaces need to be cleaned, and a small amount of lubricating oil should be applied to the O-ring to avoid cracking of the housing due to overly tight screws. Although the Atlas Copco air compressor oil filter housing is an auxiliary component, its reliability directly affects the stability of the filtration system. Regularly checking the sealing performance and structural integrity of the housing is an important step in preventing oil contamination.

Attention Points for Lubricant Selection of Atlas Copco's GA and GX Series Air Compressors Compatibility: Non-original lubricants may not be compatible with the equipment material or the original residual lubricants, leading to problems such as sludge formation and seal aging. It is recommended to avoid mixing them. Work Condition Adaptation: Select the appropriate type of lubricant based on the working pressure, temperature, running time, and environmental conditions of the air compressor. Regular Replacement: Even for long-lasting lubricants, it is necessary to regularly check the oil level and quality as per the manual, and replace them on time. At the same time, replace the oil filter to avoid affecting the equipment performance due to deteriorated oil quality. Model Matching: The GA series are mostly large industrial-grade air compressors, while the GX series are more inclined towards small-sized or portable ones.

Usage and Maintenance Notes Strictly match the model Different series of air compressors (such as GA, GHS, ZR, etc.) require the use of corresponding model-specific oils. Mixing or using the wrong type may cause equipment damage and affect warranty. Regular replacement and inspection Replace according to the specified cycle in the equipment manual (synthetic oil usually has a longer cycle than mineral oil), and replace oil filters, air filters, etc. at the same time. Regularly test the oil quality (such as viscosity, moisture content, impurity content) to avoid failures caused by deteriorated oil. Storage and refilling The oil needs to be stored in a sealed manner in a cool and dry place to avoid contamination; when refilling, ensure that the tools are clean to prevent impurities from entering the oil circuit system.

Atlas Copco GA26VSD is a variable-frequency screw air compressor in the GA series of Atlas Copco. It is specially designed for high efficiency, energy conservation, and flexible adaptation to different gas usage requirements, and is widely used in various industrial scenarios.

Common Problems and Solutions for Atlas Copco Air Compressor Air Filter Enclosures Increased intake resistance: This may be due to foreign objects blocking the interior or an unreasonable design of the airflow channel. Clean the debris or replace the compatible enclosure. Sealing failure: This is often caused by aging seals or deformed enclosures. Replace the sealing ring or repair the enclosure (metal enclosures can be corrected, while plastic enclosures are recommended to be replaced directly). Enclosure damage: Minor damage to the metal enclosure can be repaired by welding. Severe deformation or cracking of the plastic enclosure requires a complete replacement to avoid affecting the filtration effect. Selecting an appropriate air filter enclosure and using high-quality filter elements can effectively ensure the long-term stable operation of the air intake system of the air compressor, reducing the wear of the main unit and energy loss.

Atlas Copco Air Compressor Intake Valve Maintenance Kit Compatibility and Selection The intake valve structures of different series of air compressors (such as GA37, GA75, ZT55, etc.) are different. The maintenance kit needs to be strictly matched with the model of the air compressor. Usually, the model of the air compressor or the part number of the intake valve is used as the selection basis (such as the 1622 series intake valve maintenance kit for the GA series). It is recommended to select the corresponding kit based on the specific model of the air compressor, the production year, and the model of the intake valve (you can query it in the equipment manual or on the valve body label). Avoid mismatch in size or components.