China Scavenge line kit Manufacturer, Supplier, Factory

Atlas Copco "Wear Kit" Replacement and Maintenance Recommendations Replacement Timing: Triggered by service manual or when pressure difference/temperature abnormalities occur; Replace along with filters and lubricating oil to reduce energy consumption and failure risks. Installation and Sealing: Tighten according to torque, replace all O-rings/ seals, avoid unfiltered air or oil bypass. Recording and Warning: Update maintenance records, activate pressure difference/ hourly/ status indicator and remote alarm to shorten downtime response.

Atlas Copco also offers a series of oil coalescing filters such as DD+, PD+, and UD+. These filters can effectively reduce oil suspended matter, wet dust, and water droplets in the compressed air flow. Among them, DD+ is used for filtering oil suspended matter and wet dust; PD+ not only filters oil suspended matter and wet dust, but also can perform water separation; UD+ integrates the two filtration steps of DD+ and PD+ into one technology, which can save space and energy.

Atlas Copco SEPARATOR OIL SPARE Replacement cycle Normal operating conditions: According to the compressor manual, it is usually replaced every 2,000 to 4,000 hours (simultaneously with the lubricating oil). Severe operating conditions: When the environment is dusty, the machine operates at full load for a long time, or the oil deteriorates quickly, the replacement interval should be shortened to 1,000 to 2,000 hours. Pressure difference alarm: When the pressure difference between the oil filter inlet and outlet exceeds the set value (such as 0.3 MPa, some models come with pressure difference gauges or alarm functions), it is necessary to replace immediately.

The working principle of the constant temperature valve for Atlas Copco air compressors: When the air compressor starts, the oil temperature is low. The constant temperature valve will close the oil circuit of the cooler, allowing the lubricating fluid to directly enter the main unit, rapidly increasing the temperature and reducing wear. When the temperature rises to 70-80 degrees Celsius, the constant temperature valve will slowly open the cooling channel of the cooler, allowing the lubricating oil to cool down before entering the circulation. This can prevent the oil temperature from being too high, which would lead to a decrease in lubrication effect and overheating problems of the equipment.

Purchase Recommendation If you need to make a purchase, please provide the model number of the air compressor (such as GA55, GX15), the serial number, and the installation position of the solenoid valve (such as the intake valve, the discharge valve). Obtain precise parts from an officially authorized dealer or after-sales service center. Using non-original factory parts may lead to control failure, equipment malfunction, and even affect the overall warranty of the machine. The stable operation of the solenoid valve is the foundation of the automatic control of the air compressor. Regular inspections and timely replacements can significantly reduce the equipment failure rate and ensure gas production efficiency.

The Atlas Copco DRAIN HDF120-AC drain valve adopts an electronic timed drainage system, providing reliable performance without the need for manual drainage. It has an IP65 protection rating for the housing, effectively preventing dust and moisture from entering, and is suitable for various industrial and outdoor applications. Its compact design saves space and is easy to install in existing compressed air configurations, with low maintenance requirements. Additionally, the DRAIN HDF120-AC reduces air loss during drainage and offers energy-saving benefits.