China atlas copco Synthetic rolling and plain bearing grease Manufacturer, Supplier, Factory

Atlas Copco 2906011200,Filtering and Purification Function: The air filter removes impurities from the air entering the air compressor to ensure the quality of the compressed air. The oil filter removes impurity particles from the lubricating oil to keep it clean and prevent metal particles, dust, etc. from entering the main unit. The oil-gas separator separates the lubricating oil from the compressed air to ensure the recycling of the lubricating oil and reduce the oil content in the compressed air. Lubrication Protection Function: The lubricating oil lubricates the internal parts of the air compressor, reducing friction and wear between parts and having good cooling performance. It forms a protective film on the surface of high-speed rotating components, preventing moisture and impurities from invading and protecting the internal parts from corrosion. System Protection Function: Prevent equipment damage by regularly replacing consumables to avoid overload and damage of the equipment due to clogged filter elements. Extend Service Life: By effective filtering and lubrication, significantly extend the service life of the air compressor main unit.

I.Main Components Included in the Set。 Air filter Filters out dust and impurities in the air to prevent them from entering the compressor. It is recommended to replace every 4000 hours to avoid blockage that leads to a decrease in air volume and increased energy consumption. Oil filter Filters impurities in the lubricating oil to protect key components such as bearings and gears. Blockage will cause an increase in oil pressure, triggering a protective shutdown. Oil-gas separator Separates the lubricating oil from the compressed air to ensure that the exhaust contains an acceptable amount of oil (typically ≤ 3ppm). Failure will result in increased fuel consumption, oil in the exhaust, and contamination of the after-treatment equipment. Lubricating oil Synthetic lubricants (such as the SynthOil series from Atlas Copco) provide lubrication, cooling and sealing functions. They need to be replaced every 4,000 hours. Old lubricants will reduce cooling efficiency and increase the risk of carbon deposits. Sealing kit Includes O-rings, gaskets, etc., to prevent leakage of lubricating oil and compressed air. Old sealing parts may cause a decrease in pressure or oil leakage. Other accessories Some packages may include belts (belt drive type), sensors, hoses, etc. II. Advantages of the Maintenance Package One-stop purchase: A single package covers all the replacement needs of key components, avoiding the omission of accessories. Original factory matching: Atlas Copco original accessories ensure perfect compatibility with the equipment, extending the service life. Cost-effectiveness: The package price is usually more favorable than purchasing accessories separately. Professional guidance: A detailed maintenance manual is included, guiding users on how to replace the accessories correctly.

Atlas Copco Full Stainless Steel Gear Wheel Maintenance and Precautions Lubrication Guarantee: It should be used in conjunction with dedicated gear oil to ensure that the meshing surfaces of the gears are fully lubricated, reducing wear caused by dry friction; regularly check the oil level and condition of the lubricant and replace it according to the specified cycle. Regular Inspection: During operation, pay attention to observing whether there are abnormal noises, vibrations or temperature increases at the gear transmission parts. This may indicate gear wear, poor meshing or bearing problems, and it is necessary to stop the machine for inspection in time. Replacement Specifications: When replacing, use the original full stainless steel gear wheel to ensure that the installation dimensions, module, and tooth count of the new gear wheel are completely matched with the original model; during installation, ensure the coaxiality of the gear shaft to avoid early damage due to installation deviation.

Atlas Copco 2906017500，The air intake valve of the air compressor is the core control component of the compressor. It is like the "breathing organ" of the entire system, precisely regulating the entry of air. Usually, the control system, based on the signal from the pressure sensor, drives the pneumatic piston or butterfly valve through an electromagnetic valve to change the opening degree. Inside the valve, there is a rotary check valve that quickly and tightly closes by relying on the counterweight and pressure difference. This protects the internal components of the main unit from wear and contamination.

Atlas Copco GA26VSD is a variable-frequency screw air compressor in the GA series of Atlas Copco. It is specially designed for high efficiency, energy conservation, and flexible adaptation to different gas usage requirements, and is widely used in various industrial scenarios.

The oil filter element of Atlas Copco air compressors (Common Problems and Failure Causes) The filter element gets clogged prematurely Reasons: Excessive environmental dust (unfiltered intake air), excessive oil addition or mixing of different brand oils leading to emulsification, increased internal wear . Treatment: Improve environmental cleanliness, standardize oil usage, inspect worn components. Poor filtering effect Reasons: Using inferior filter elements , seal ring not properly aligned during installation , bypass valve always open. Treatment: Select original factory or high-quality aftermarket filter elements, ensure proper installation sealing, regularly check bypass valve function. Filter element rupture Reasons: Installation too tight, abnormal system pressure increase, insufficient strength of filter element material. Treatment: Standardize installation torque, check oil pressure control system, replace with qualified filter element.