Industry News

Maintenance and Replacement Suggestions for Air Filters of Atlas Copco Screw Air Compressors Replacement Cycle: Generally, it is recommended to replace the air filter according to the specified cycle in the equipment maintenance manual (such as after 2000-4000 hours of operation, which may vary depending on the model and usage environment). If the dust concentration in the usage environment is high (such as in mines or cement plants), the replacement cycle should be shortened. Inspection Method: Regularly (e.g., weekly) check the cleanliness of the air filter. You can determine if it is clogged by using a pressure differential indicator (available on some models) — when the indicator value exceeds the set threshold, it is necessary to replace it promptly. Replacement Precautions: During replacement, ensure proper installation and good sealing; avoid allowing impurities to fall into the intake pipe during disassembly and assembly. After replacement, check for any leakage.

Maintenance suggestions for the linkage components of Atlas Copco air compressors Regularly check the tightness of the linkage components (such as coupling bolts, belt tension), to prevent eccentricity or slippage due to loosening. Observe for any abnormal vibrations, unusual noises or temperature increases, which may indicate wear or poor fit of the linkage components. Replace the wear-prone parts (such as coupling elastomers, belts) according to the maintenance schedule to ensure transmission efficiency and safety.

The electromagnetic valve maintenance kit for Atlas Copco EWD330 electronic drainage valve is applicable for maintenance suggestions. Applicable models: Only applicable to Atlas Copco EWD330 type electronic drainage valve. Before purchase, it is necessary to confirm the production batch and electromagnetic valve specification of the drainage valve to avoid model mismatch. Maintenance timing: When the drainage valve shows slow operation, abnormal drainage , abnormal noise from the electromagnetic valve, or air leakage, it may be necessary to repair the electromagnetic valve. At this time, this kit can be used to replace the worn parts. Installation note: It is recommended to operate by professionals. Before maintenance, cut off the power and air source, assemble in accordance with the original factory manual specifications, ensure that the components are installed properly, and avoid functional failure or safety hazards due to improper assembly.

Atlas Copco EWD330 Electronic Drain Valve Maintenance Recommendations Compatible Models: This product is only applicable to Atlas Copco EWD330 electronic drain valves. Before purchase, confirm the production batch and electromagnetic valve specifications of the drain valve to avoid model mismatch. Maintenance Timing: When the drain valve shows slow operation, abnormal drainage (such as no drainage or continuous drainage), abnormal noise from the electromagnetic valve, or air leakage, it may be necessary to repair the electromagnetic valve. At this time, this kit can be used to replace the worn parts. Installation Notes: It is recommended to operate by professionals. Before maintenance, cut off the power and gas sources, assemble in accordance with the original factory manual specifications, ensure that the components are installed properly, and avoid functional failures or safety hazards due to improper assembly.

The Atlas Copco C242 screw air compressor discharge valve repair kit is applicable for maintenance recommendations. Applicable models: Specifically designed for the C242 screw air compressor model. It is necessary to confirm the specific production batch and discharge valve model of the equipment (this can be verified through the equipment serial number or part number). Replacement Timing： When there are abnormal compressor pressure， significant pressure remaining during discharge， slow loading response or abnormal air leakage sounds， etc.， it may indicate that the discharge valve needs maintenance or replacement of components. At this time， this kit can be used for maintenance. Installation note： It is recommended to operate by professional technicians according to the original factory maintenance manual to ensure correct assembly and avoid secondary faults caused by improper installation.

Atlas Copco Air Compressor Oil Pipe Maintenance and Replacement Regular Inspection: It is necessary to regularly check whether the oil pipes have hardened, cracked, bulged, loose joints or leakage. Especially during the equipment maintenance period, key inspections should be conducted. Timely Replacement: If the oil pipes are found to be aging or damaged, they should be replaced immediately with oil pipes that meet the original factory specifications to avoid oil leakage causing the equipment to run without sufficient lubrication, resulting in severe faults such as excessive wear of the main unit and overheating.