Industry News

The main functions of Atlas Copco's MK5S boost unit kit The MK5S boost unit kit utilizes the mechanical boosting principle to increase the output pressure of the existing compressed air system to a higher level (usually by a certain proportion based on the original pressure, depending on the system configuration), suitable for equipment that requires intermittent or localized high-pressure air sources, such as pneumatic tools, precision instruments, high-pressure testing devices, etc. It does not require the separate configuration of a high-pressure air compressor for local needs, thereby saving equipment costs and installation space.

Maintenance Tips for the Outer Shell of Atlas Copco Compressor Oil Filter When replacing the oil filter element, check if there are any impurities or oil stains remaining inside the shell. If necessary, clean it to avoid contaminating the new filter element. When installing, ensure that the sealing parts are in good condition and the end cover or sealing cover is firmly tightened to prevent oil leakage. After long-term use, if cracks, deformation or damaged threads are found on the shell, it is necessary to replace it in time to avoid abnormal oil pressure or safety hazards caused by structural failure.

The main function of the automatic drainage valve water for Atlas Copco air compressors The automatic drainage valve water kit, through built-in sensors or mechanical structures, detects the presence of condensate water and automatically opens the drainage channel to discharge the water outside the system. No manual operation is required, and it is particularly suitable for equipment that is prone to generating condensate water, such as air compressor storage tanks, dryers, filters, and post-coolers.

Atlas Copco also offers a series of oil coalescing filters such as DD+, PD+, and UD+. These filters can effectively reduce oil suspended matter, wet dust, and water droplets in the compressed air flow. Among them, DD+ is used for filtering oil suspended matter and wet dust; PD+ not only filters oil suspended matter and wet dust, but also can perform water separation; UD+ integrates the two filtration steps of DD+ and PD+ into one technology, which can save space and energy.

Atlas Copco Screw Compressor Minimum Pressure Valve Assembly Original Model Selection and Notes It is necessary to select the corresponding specification of the minimum pressure valve assembly according to the compressor model (such as GA75, G110). Original factory parts (such as 1622 series, 0300 series numbers) can ensure that the pressure setting value, flow parameters, and the unit are completely matched. Non-original factory parts may cause unstable performance due to insufficient structural accuracy, and even lead to serious problems such as poor lubrication and failure of oil-gas separation. It is recommended to prioritize the use of original factory components.

If you need to purchase the water and oil pipes of Atlas Copco air compressors or confirm the specific specifications, it is recommended to provide the model of the air compressor (such as GA37, G55) and the location of the pipeline (such as the outlet pipe of the oil cooler). Refer to the serial numbers in the equipment parts manual (usually identified by a combination of numbers, such as 1622 series, 0650 series), and obtain the compatible accessories through official channels.